Installation Guide:

The Saddle Blanket Seat Covers can be installed properly by adopting the installation steps included below:

Saddle Blanket Backrest Seat Cover Installation  

To install Saddle Blanket Backrest Seat Cover over bucket seats with non-removable headrest, simply fold the seat forward and then properly install the backrest seat cover over the original seat cover.

In other specific seats, to install the Saddle Blanket Backrest Seat Cover, you may need to insert the flap via the opening between seat back and seat bottom and then fasten the Velcro fastener. After fastening the Velcro fastener, just drape the Saddle Blanket Backrest Seat Cover over the original seat cover.

However, to install the Saddle Blanket Backrest Seat Cover over older jeeps, you need to fold the seat forward and then you can easily cover the seat with your Saddle Blanket Backrest Seat Cover.

Before installing the Saddle Blanket Backrest Seat Cover over 60/40 split bench seats, remove the headrest first. Next, fold the seat forward and insert the flap through the opening between seat back and seat bottom. Now, fasten the Velcro fastener and then you can simply put the Saddle Blanket Backrest Seat Cover around your original seat cover.

Saddle Blanket Solid Bench Seat Cover Installation
To install the Saddle Blanket Solid Bench Seat Cover successfully, fold the seat forward and then cover the backrest with the backrest cover. Now, if the seat has an armrest, you need to position the backrest in the top high position and if the seat has a headrest, remove it before draping the Saddle Blanket Solid Bench Seat Cover around your original car seat cover.   

Saddle Blanket Seat Bottom Cover Installation

Just fold the seat forward and then install the Saddle Blanket Seat Bottom Cover around the original seat cover. Next, attach buckles and hooks, insert the flap through and finally hide the extra Saddle Blanket Seat Bottom Cover behind the plastic pieces.

Saddle Blanket Console Cover Installation

To install the Saddle Blanket Console Cover properly, simply follow the installation steps mentioned below:

Open the console and
Attach the console cover over the console top and console bottom.
Now, insert the flap through the opening between the console top and console bottom and affix the Velcro fastener.

Specific Instructions On Saddle Blanket Seat Cover Installation  

Only Saddle Blanket Seat Covers designed with opening flaps or airbag cut outs are meant for covering seats with integrated seat airbags. To install your Saddle Blanket Seat Cover equipped with opening flaps, just insert the flap through the cut out in such a manner that it can be easily opened during use.

An opening in your Saddle Blanket Seat Cover is required for levers and controls that are necessary for your seat support.
Your Saddle Blanket armrest cover can be adequately installed by fastening a Velcro fastener.

Cleaning Instruction:

Saddle Blanket Seat Covers can be cleansed successfully through hand washing as well as via the machine cleaning procedure. Hand washing is applied on Saddle Blanket Seat Covers that are not so dirty and proper hand washing proves to be adequately effective for thorough cleaning of your Saddle Blanket Seat Covers.

For machine cleaning, you need to use large-sized automatic speed control washers (M/Cs) and altogether you are instructed not to use small automatic speed control washers at any cost. In small M/Cs, the washing space is considerably small and as such the fabric movement of your Saddle Blanket Seat Cover is likely to be hindered if small-sized automatic speed control washers are utilized for machine cleaning. This M/Cs are available in almost all the commercial laundries and while cleaning your Saddle Blanket Seat Covers, never use agitators as the use of agitators is likely to tear off your seat cover fabric.

Saddle Blanket Seat Cover Cleaning Process

Successful cleaning of your Saddle Blanket Seat Cover is possible only at 20-27 degree centigrade and for this purpose; you need to avail of a suitable non-toxic, non-caustic, bio-degradable and eco-friendly anionic laundry detergent. The cleaning steps are detailed below:

First of all, mix two cups of non-caustic, non-toxic, bio-degradable liquid anionic laundry detergent with warm/cold water and soak the Saddle Blanket Seat Cover on it for a period of five minutes to release the dirt particles.

Next, wash the Saddle Blanket Seat Cover thoroughly for 5 minutes with gentle cycles and then undertake a two cycle rinsing of the seat cover with cold water.
Thereafter, rinse with one cycle and make the Saddle Blanket Seat Cover half dry and then flat dry the seat cover in normal atmosphere.
This Saddle Blanket Seat Cover cleaning process ensures adequate protection to the finishing treatment of your seat cover fabric.

You can view the technical specification of Seat Diagrams

Click on following link to View or Download the Seat Diagram

View Seat Diagram

Download Seat Diagram PDF file