Installation Guide:

Spacer Mesh Backrest Seat Cover Installation

For the installation of Spacer Mesh Backrest Seat Cover around bucket seats with non-removable headrest, just fold the seat forward properly and then cover the original seat cover with the Spacer Mesh Backrest Seat Cover.

To install Spacer Mesh Backrest Seat Cover around certain other seats, insert the flap via the opening between seat back and seat bottom and then fasten the Velcro fastener. Now, you can easily place the Spacer Mesh Backrest Seat Cover around the original seat cover.

You can easily install the Spacer Mesh Backrest Seat Cover on older jeep models by folding the seat forward and then covering the original seat cover with the Spacer Mesh Backrest Seat Cover.

For successful installation of Spacer Mesh Backrest Seat Cover around 60/40 split bench seats, you need to remove the headrest first. Then you need to fold the seat forward and simultaneously insert the flap through the opening between seat back and seat bottom. Then, fasten the Velcro fastener and place the Spacer Mesh Backrest Seat Cover around the original car seat cover.

Spacer Mesh Solid Bench Seat Cover Installation

In the very first step, fold the seat forward and then cover the backrest with the backrest cover.

If the Solid Bench Seat has an armrest, you are instructed to place the backrest cover at a high position above the armrest and if the Solid Bench Seat is equipped with a headrest, you need to remove it before moving ahead to place the Spacer Mesh Solid Bench Seat Cover around the original seat cover.

Spacer Mesh Seat Bottom Cover Installation

Fold the seat forward and then drape the Spacer Mesh Seat Bottom Cover around the original seat cover.

Now, insert the flap via the fixed buckles and hooks and then tuck the additional Spacer Mesh Seat Bottom Cover behind the plastic pieces.

Spacer Mesh Console Cover Installation

The Spacer Mesh Console Cover installation process consists of three steps and these are detailed below:
In the very first step, open the console.
Now, move on to cover the console top and the console bottom properly.
After covering the console top as well as the console bottom, push the flap via the opening between console top and console bottom and finally fasten the Velcro fastener.

Other Spacer Mesh Seat Cover Installation Instructions

Apart from the installation guidelines mentioned above, you are required to follow certain other installation instructions for successful installation of your Spacer Mesh Seat Covers. These installation instructions are included below:

To install your Spacer Mesh Seat Cover around levelers/controls, you are required to make a small opening in your seat cover.

Use Spacer Mesh Seat Covers designed with opening flaps or airbag cut outs only to wrap around seats with integrated seat airbags. However, for successful installation, you need to push the flap through the cut out in such a way that it can be effortlessly opened during deployment.

For successful installation of your Spacer Mesh armrest cover, fasten the Velcro fastener.

Cleaning Instruction:

You need to follow a host of cleaning instructions to ensure that your Spacer Mesh Seat Cover is cleansed properly and thoroughly. These guidelines are detailed below:
To wash off Spacer Mesh Seat Covers that are not considerably dirty, you can use the simple hand washing process. However, to clean your thoroughly dirty Spacer Mesh Seat Covers, you should opt for the machine cleaning process.

Machine cleaning is a wholly reliable cleaning procedure and for this purpose, you should use large-sized automatic speed control washers (M/Cs) that are available in almost all commercial laundries. You are not instructed to use small M/Cs to cleanse your Spacer Mesh Seat Covers as the small washing space in small M/Cs obstructs the fabric movement of your Spacer Mesh Seat Covers. Alongside, don’t use agitators in the machine cleaning process as agitators might tear off or rip apart the fabric material of your Spacer Mesh Seat Cover.

Spacer Mesh Seat Covers: The Cleaning Process

You can adopt this cleaning procedure to clean your Spacer Mesh Seat Covers thoroughly and it involves the following steps:

Take warm/cold water and mix two cups of a non-toxic, non-caustic, eco-friendly and bio-degradable liquid anionic detergent with this warm/cold water. Thereafter, soak the Spacer Mesh Seat Cover on this mixture for around 5 minutes.

Now, undertake a 5 minute rinsing of the Spacer Mesh Seat Cover with gentle cycles and then rinse the Spacer Mesh Seat Cover with two cycles.

Make the Spacer Mesh Seat Cover half dry after rinsing it again with one cycle and finally dry the Spacer Mesh Seat Cover in normal environment.

This cleaning process becomes successful only at 20-27 degree centigrade and you are not recommended to dry clean your Spacer Mesh Seat Cover in this process. However, this cleansing process proves suitably efficient in protecting the fabric finish of your Spacer Mesh Seat Cover.

You can view the technical specification of Seat Diagrams

Click on following link to View or Download the Seat Diagram

View Seat Diagram

Download Seat Diagram PDF file