Installation Guide:

Triguard Car Cover Installation Process:

For proper installation, place the Triguard Car Cover over the vehicle first and then unfold it slowly. If vehicle cover is fitted with mirror pockets, install the mirror pockets before putting the car cover over the front and rear ends of the vehicle. Proper installation of the mirror pockets keeps theTriguard Car Cover fixed to its position even in stormy weather conditions.

Specific Measures To Be Adopted Before And During Installation:

Before installing the Triguard Car Cover, ensure that the body of your car is clean and dust free. If the car body is dust ridden, your Triguard Car Cover is at risk of attracting dust particles and once the dust and dirt particles are stuck, it’s likely to cause damage to the car cover fabric. Ensure not to install the Triguard Car Cover over a wet vehicle.

While installing the Triguard Car Cover, it is necessary to keep the car cover away from the exhaust tips if they are too sharp-edged or hot, to prevent it from melting.

Create a small opening in car cover to install it over the antenna of the car. To install the Triguard Car Cover successfully over the antenna, follow a few steps. First, remove the car cover and fix the antenna at the usual position, Thereafter, select the point where the base of the antenna meets the car and cut a small opening in your Triguard Car Cover at this point. Then fix the antenna and position the car cover over the antenna patches.

Triguard Car Cover Lock Kit Installation:

If you have a car cover lock kit, you should install it properly to prevent theft. The Triguard Car Cover lock kit has a small vinyl coated cable which is further equipped with a metal piece on one end and a loop on the other end.

For the installation of your Triguard Car Cover lock kit, first move to the passenger’s side and fix the loop at around two inches through the grommet. After that, push the metal piece, at other end of the cable to the driver’s side by taking it along under the grommet through the loop of the first cable. Now, go to the driver’s side, pull the cable along and then lock the end pieces of the cable.

Cleaning Instruction:

You can clean the Triguard Car Cover by using your hands or with machine. You can also wash the Triguard Car Cover by placing it over your vehicle and by bringing out the inner cover. Then clean it by spraying water with the help of a hose. The hand cleaning procedure is generally used for car covers that are not very dirty. For machine cleaning, you can use M/Cs available in most of the commercial laundries. These are automatic speed control washers that can be used to clean the Triguard Car Cover. While using M/Cs ensure only large are used as in small M/Cs, the washing space is less. Do not use agitators in the cleaning process in order to prevent any kind of damage to the Car Cover.

Triguard Car Cover Cleaning Process:

The cleaning procedure is an easy process. To start off with, you need a non-caustic, bio-degradable, non-toxic and eco-friendly anionic detergent. First of all, take two cups of this detergent and mix it with warm /cold water. Soak the Triguard Car Cover in it for five minutes. Now, with gentle cycles, wash the Triguard Car Cover for five minutes. Rinse the Triguard Car Cover with two cycles and then again one cycle rinsing is required to half dry the Car Cover. You can then place it over your vehicle for complete drying.

Comparison:

A brief comparison of Coverking`s TRIGAURD fabric to Covercraft`s SENTREX and BLOCK IT 350 fabrics yield the following results:

BLOCK IT 350 displays fair water resistance capacity, SENTREX shows good water resistance and Coverking`s TRIGAURD fabric also shows a good degree of water resistance.

With regard to fabric breathability, Covercraft`s BLOCK IT 350 fabric yields good results, the SENTREX material shows better degree of breathability. Coverking`s TRIGAURD fabric yields results in sync with Sentrex i.e. better breathability.

BLOCK IT 350 shows fair fabric strength over a period of time, SENTREX also displays fair fabric strength but the TRIGAURD fabric material exhibits better degree of strength than the two Covercraft fabrics.

The UV protection provided by Coverking`s Trigaurd Car Covers is better quality protection. In comparison to the TRIGAURD fabric, SENTREX and BLOCK IT 350 fabrics offer only good and fair degree of UV protection.

In drape ability and handling, SENTREX and BLOCK IT 350 fabrics display fair results while the TRIGAURD fabric remains ahead of the two Covercraft`s fabrics with its comparatively good drape ability and handling properties. 

The overall performance parameter of SENTREX as well as BLOCK IT 350 fabric is considered to be 4 whereas performance parameter of Coverking`s TRIGAURD fabric is 5 and thus better than the other two fabric materials.